Garmin Legacy Software Versions Guía de usuario Pagina 216

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 364
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 215
Garmin G1000 Pilot’s Guide for Cessna Nav III 190-00498-00 Rev. A
7-80
MULTI FUNCTION DISPLAY
Airport Runway Information Field
The Airport Runway Information field displays runway
designations, length, surface type and lighting for the
selected airport. A map image of the runway layout and
surrounding area is also displayed on the Airport Runway
Information Page. The map image range is displayed in
the lower left corner and is adjustable using the joystick.
For airports with multiple runways, information for each
runway is available.
To display information for each additional
runway:
1. Press the
FMS
knob to activate the cursor.
2. Turn the
large FMS
knob to place the cursor on
the Runway designation field.
3. Turn the
small FMS
knob to display the next
runways for the selected airport.
4. Continue turning the
small FMS
knob to select
the desired runway.
5. To remove the flashing cursor, press the
FMS
knob.
Rotate the joystick counterclockwise to select a lower
range and rotate it clockwise to select a higher range.
The following descriptions and abbreviations are used
on the Airport Runway Information field:
Type – Usage type: Public, Military or Private
Surface – Runway surface types include: Hard,
Turf, Sealed, Gravel, Dirt, Soft, Unknown or Water
Lighting – Runway lighting types include: No
Lights, Part Time, Full Time, Unknown or Fre
-
quency (for pilot-controlled lighting)
Figure 7-60 Runway Information Field
Vista de pagina 215
1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 363 364

Comentarios a estos manuales

Sin comentarios