Garmin Software Version 0321.23 Manual Pagina 143

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 266
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 142
G1000 System Maintenance Manual – Diamond DA40/40F Page 5-11
190-00545-01 Revision G
Table 5-3. Engine Airframe Instrument Failures (Cont)
Invalid Field Sensor Solution
Oil Temperature
Sensor
Check oil temperature sensor – GEA wiring.
Replace oil temperature sensor. Refer to G1000/DA40 Install
Drawing, 005-00304-00 or OAM 40-222 for DA 40 F.
Replace defective GEA 71.
Alternator
Current
Sensor
Check current sensor sensor – GEA wiring.
Replace current sensor. Refer to G1000/DA40 Install Drawing,
005-00304-00 or OAM 40-222 for DA 40 F.
Replace defective GEA 71.
Fuel Quantity
Sensors (2)
Check fuel quantity sensor – GEA wiring.
Replace fuel quantity sensor. Refer to the DA40 AMM.
Replace defective GEA 71.
5.2.3 ADF/DME Failure
Effective System Software Version 0369.08 or later, an ADF and DME interface were added as an option.
The PFD functions as a control head for the remote-mounted Becker ADF and Honeywell DME. A DME
or ADF failure is represented by the following red X’s.
Table 5-4. ADF/DME Failure
Invalid Field Sensor Solution
Becker ADF
and
Honeywell DME
Ensure that GIA 63 #2 is properly functioning.
Reload the ADF or DME option configurations.
Check for proper operation of the ADF or DME receivers. Ensure
that each is receiving power.
Check ADF – GIA2 and DME – GIA2 interconnect. Refer to
Diamond wiring diagram for details.
Replace ADF or DME unit(s).
Vista de pagina 142
1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 265 266

Comentarios a estos manuales

Sin comentarios