Garmin Software Version 0321.23 Manual Pagina 177

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 266
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 176
G1000 System Maintenance Manual – Diamond DA40/40F Page 5-45
190-00545-01 Revision G
Table 5-26. Database Alerts (Cont)
Failure Message Cause Solution
MFD1 DB ERR – MFD1 terrain
database error exists.
The MFD has encountered an
error in the terrain database.
Confirm database cards are inserted
properly.
Verify that the card is the SanDisk
brand. Use of other brand SD cards is
not recommended.
Update the database cards and
reinstall.
If the error persists, replace terrain
datacard.
If the error persists, replace the MFD or
PFD.
PFD1 DB ERR – PFD1 terrain
database error exists.
The PFD has encountered an
error in the terrain database.
DB MISMATCH – Aviation
database version mismatch. Xtalk
is off.
The system has found the
Jeppesen aviation database
cycles in the PFD and MFD do not
match.
Load current aviation database versions
to both displays.
DB MISMATCH – Aviation
database type mismatch. Xtalk is
off.
The system has found the
Jeppesen aviation database types
in the PFD and MFD do not match
(i.e., different regions: Americas,
International, Atlantic, etc)
Load same type aviation database to
both displays.
DB MISMATCH – Basemap
database version mismatch. Xtalk
is off.
The PFD and MFD have different
basemap versions installed.
Replace or update both terrain database
cards to install matching databases.
If the error persists, replace terrain
datacard.
DB MISMATCH – Airport Terrain
database version mismatch.
The PFD and MFD have different
Airport Terrain database versions
installed.
DB MISMATCH – Terrain
database version mismatch.
The PFD and MFD have different
terrain database versions
installed.
DB MISMATCH – Obstacle
database version mismatch.
The PFD and MFD have different
obstacle database versions
installed.
DB MISMATCH – Terrain
database type mismatch.
The PFD and MFD have different
terrain database types installed
(i.e., different regions: Americas,
International, Atlantic, etc).
5.8.3 Cooling Alerts
Table 5-27. Cooling Alerts
Failure Message Cause Solution
MFD1 COOLING – MFD1 has
poor cooling. Reducing power
usage.
MFD1 has exceeded its operating
temperature range.
Check MFD Fan for proper operation.
Replace the MFD.
If problem persists contact Garmin.
PFD1 COOLING – PFD1 has poor
cooling. Reducing power usage.
The PFD has exceeded its
operating temperature range.
Check PFD Fan for proper operation.
Replace the PFD.
If problem persists contact Garmin.
Vista de pagina 176
1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 265 266

Comentarios a estos manuales

Sin comentarios